%%file(%%tmplatedir%%head-tags1%%tmplext%%)%% Wazoodle : Diaper Kit Wipes : %%item%% : Catalog# %%catalogno%% %%file(%%tmplatedir%%header%%tmplext%%)%%

%%IF($popup ne "") THEN %% %%IF($picture ne "") THEN %%category%% %%item%% Click for more detail %% %%IF($popup ne "") THEN %%
Product Number: %%catalogno%%

Fabric Specs:

Wash NormalTumble dry, medium heatBleach when requiredIron, Any Temperature, Steam or Dry

Size: Precision cut 5" (125mm) diameter
Content: %%Content%%


Our nursing pad blanks are precision cut in 5" (12.7cm) diameter circles.  Assembly is simple, just serge the edge or topstitch and turn. 

Each kit includes 24 precision cut pieces of fabric, enough to make 12 double layer pads or 8 triple layers.   They are incredibly easy to sew and we take care of the toughest part -- cutting!

Tips  for making nursing pads:

  • DO NOT pre-wash them before sewing, these are precision cut and ready to sew. 
  • Layer up your pads to the thickness you want.  Typical for flannel, interlock or jersey material  is 3 layers for normal or 4 layers for heavy.  CoolMax + Micro fleece is 1 layer each.  You can add layers to add absorbency.  If you want your pads to be leak proof, sew in the optional polyurethane barrier under the outermost layer of fabric.
  • Serged edge: Serge the edge with a regular serge stitch. 
  • Zigzag edge: run a wide but closely spaced zigzag stitch around the edge. 
  • Turn & Topstitch (a little tougher): Place the backs of the blanks together.   Sew around the blanks using a straight stitch until you are 2" from where you started.  Turn the wipe out so the right sides of the fabric are facing out by pulling the material back through the  opening.  If you are adding additional absorbent or barrier layers:
    • Trim 3/8 off the edge (or 3/4" off the diameter) of the blanks you are using in the middle layers.  If there is more than 1 middle layer, zigzag stitch around the middle layer blanks to keep them together.  Stuff the middle layer through the opening in the outer layer, and works all the layers flat. 
  •  Find the opening in the outer layer, fold the open edges under, then press the blank flat.  To finish, sew a straight stitch around the entire blank (make sure you catch the hidden layers if you added them).  
%%IF($descr ne "") THEN %%descr%%

%%IF($retail ne "") THEN %% %%IF($Bolt_Size ne "" and $qty_on_hand > $Bolt_Size) THEN %% %%IF($Bolt_Size ne "" and $qty_on_hand > $Bolt_Size) THEN %% %%IF($Bolt_Size_2 ne "" and $qty_on_hand > $Bolt_Size_2) THEN %%
Price / %%unit_of_measure%%: US$     CDN$   
Retail:$ %%exch(retail)%%  $ %%retail%% 
Wazoodle Price: $ %%exch(ret_price)%%  $ %%ret_price%% 
Frequent Buyers: $ %%exch(whsl_price)%%  $ %%whsl_price%% 
Save more with these quantity breaks.
%%Bolt_Size%%+ %%unit_of_measure%%s$ %%exch(Bolt_Price)%%  $ %%Bolt_Price%% 
%%Bolt_Size_2%%+ %%unit_of_measure%%s$ %%exch(Bolt_Price_2)%%  $ %%Bolt_Price_2%% 
%%IF($qty_on_hand <= "10") THEN
In Stock: %%qty_on_hand%% %% %%IF($qty_on_hand <= "0") THEN Sorry, this item is sold out!%%
%%dispoption1%% %%dispoption2%%
%%IF($disptext1 ne "") THEN
%%disptext1%% %% %%IF($disptext2 ne "") THEN
%%disptext2%% %% %%IF($disptext3 ne "") THEN
%%disptext3%% %% %%IF($qty_on_hand > "0") THEN %% %%IF($swatch ne "") THEN %% %%IF($qty_on_hand > "0") THEN